Technical Features
Test pressure (PT): PS x 1,43.
Body: in cold formed steel.
Constructive methodology: end parts welded in protected argon atmosphere.
Working temperature for standard execution: from - 20°C to + 80°C.
Standard diaphragm: non replaceable can be used with mineral oils and non corrosive fluids.
Installation: in every position.
Compression ratio:
- recommended: P2/P0 = 2.5.
- maximum: P2/P0 = 4.
Mechanical life: the number of cycles is inversely proportional to the increase of the compression ratio
Also available:
- H.. LT series for working temperature till – 40°C.
- diaphragm for working with aggressive Fluids.
According to: 97/23/CE-PED, 94/9/CE-ATEX Group II Cat 2, GOST-R (Russia), SELO (China).
CodicePressione massimaVolume azzoto (Lt)Precarica max (Bar)HDECBConnessione idraulicaPortata massimaPeso
H100R2500.1516014270.004523.015.0M 18X1,5401.20
H100V2500.1516014270.004523.015.0M 18X1,5401.20
H350R2500.3516020570.003523.015.0M 18X1,5351.70
H350V2500.3516020570.003523.015.0M 18X1,5351.70
H500R2500.4516016792.005523.017.0M 18X1,5501.90
H700R2500.7016022092.004023.017.0M 18X1,5402.70
H700V2500.7016022092.004023.017.0M 18X1,5402.70
H1000R2501.00160200115.006023.019.0M 18X1,5503.50
H1400R2501.40160270115.006023.019.0M 18X1,5404.90
H2000R2502.00160350115.006023.019.0M 18X1,5405.80

QTY + -